In this guide we will take you through how to configure your Comfast Onmi with a Wireless Bridge. First, remove all components from the packaging and lay them out in front of you. Take the first panel and run an Ethernet lead from the WAN port to the
This guide will show you how to set up a one of our Comfast long range WiFi access points as an extender, which will allow you to connect a WiFi device to your internet router from a distance of 100-200m. If this has not already been pre-configured f
In this guide, we will cover setting up your EnGenius wireless bridge in WDS Bridge mode. This will allow you to connect an IP camera connected to either bridge to then view from either end. Here is the wireless CCTV equipment you will need to set up
In this article we will take you through how to configure your Comfast Wireless Bridge which can help you guarantee a reliable connection for a wireless CCTV system. First of all, remove all components from the packaging and lay them out in front of
This guide shows you how to set up your Comfast bridge, if it has been pre-configured by us. Even if they don't seem to work, do not press the reset button on the bridges as this will erase all of the settings and will mean the bridges have to be set
There will be some small differences depending on the specific equipment you have but the basic idea of a bridge system is (starting from the camera):. Below is a video guide on how to set up the Ubiquiti Nano Beams. Should you need any more help wit