All articles

How to Setup Push Notifications For Gamut/DVR/NVRUpdated 7 months ago

Purpose of The Guide

This guide will show you how to access playback recordings of your Gamut camera or recorder, using a Windows or Mac computer.


Before You Begin

Your Gamut device will need to be turned on and connected to your internet router. You will need to use a TV to set up the recorder for the first time, follow the quick start guide to do so. After the initial setup, a TV or monitor is not necessary when accessing the recorder via a network connection.


If you are using a recorder and cameras, make sure that the cameras are connected and working.


If you are using a Wi-Fi bridge system with your camera, make sure that the bridges are turned on, wired correctly and communicating before you begin.


Let’s Get Started

Now that you have connected your recorder/camera to your internet router and turned it on, you will be able to view it using a program called Surveillance Client.


You will need to get the device added first to the Surveillance Client, if you have done this, then follow the guide below, if not then you will need to follow this guide Here


Direct through TV.




Through Surveillance Client.

Alarm -> Motion -> make sure the buzzer is turned on the amount of time setting you want it to trigger off.


For more information on the settings of the recorder, please refer to the quick start guide or the manual.


Need more help?

If you need help with anything else please check out our other guides or get in contact.





Was this article helpful?
Yes
No
Powered by