All articles

How To Add Port Forwarding Rules with Dyn Address to RXCAMVIEWUpdated a year ago

Purpose of The Guide


This Guide will show you how to add your Dyn address or static IP address settings to the RXCAMVIEW app on a smart device.


Before You Begin

Make sure all the port forwarding rules are in place and the Dyn address is working or you have a static IP address provided by your internet provider. If you want to know how to add the port forwarding rules, then you need to follow the guide Here.


You will also need to make sure your Dyn address is working, ours is exampledns.dvrdns.org  <- this should direct you to your Gamut cameras / NVR login page.

If you need to download the RXCAMVIEW App.

Apple IOS / Andriod

You will also need your recorder password to enable you to add the device to the RXCAMVIEW APP.


Let's Get Started

  1. Open the RXCAMVIEW App.
  2. Click on the Person Icon (Top Left) 
  3. Device List
  4. Click + -IPC/NVR/DVR 
  5. Then you need to select Manual Add.
  6. Your page should look like this and then you will need to input the information of the DYN address or your static IP.
  • IP Address / ID (Your DYN address or Static IP information)
  • Media Port 9000
  • username - admin
  • Password (Password for recorder)
  • Then click Save.


Once it has been saved you need to go back into devices lists and wait for the device to show connected to indicate you have added the device correctly, if it showing like the photo below, to see the camera you need to click on the triangle icon to loads live feeds.



Need more help?

If you need help with anything else please check out our other guides or get in contact.




Was this article helpful?
Yes
No